Renkus-Heinz
  Advancing Sound.Providing Solutions
 
 
On-Line
Customize/Place order
Order/Account Status
 
 
 
 
 
 
 
 
 
 
 
 
blue
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Home Products Amplifiers PF Series
 
PF SERIES INTELLIGENT POWER AMPLIFIERS

PF Series, Class D digital amplifiers light weight switching power supplies are over 70% efficient at full output. Their high efficiency reducing AC power requirements and eliminating the need for a cooling fan.

The PF Series, Intelligent Digital Amplifiers, drive loudspeakers to unprecedented levels of accuracy and performance. The PF Amplifiers combine comprehensive driver protection, parametric equalization and light, cool Class D power amplfication into a single compact unit.

Whenever you are ready for Ethernet audio networking, your Renkus-Heinz loudspeakers are, too; just replace the connector plate or the PF series amplifier with a RHAON empowered amplifier equipped for connection to the Renkus-Heinz Audio Operations Network. RHAON empowers you with full control over digital audio distribution, speaker-specific DSP and control/monitoring – all using standard Ethernet hardware and cable.

PF1-200
Power: 200 W RMS @ 4Ω, 300 W Burst
Frequency Response: +0.0, -.5 dB, 20 Hz to 20 kHz
THD Distortion: < 0.02% typical
Hum & Noise : <100 dB (A weighted)
Damping: >100
Input: 10K Ohm balanced differential
Sensitivity: 1.0 V for RPO
CMR: 74 dB
Controls: Gain (screwdriver adjustable)
Connectors: Input: Looping XLR; female in, male out
  (pin 1 chassis, pin 2 +, pin 3 -)
Power: Power: EC Power connector
  Universal 90–260 VAC, 50/60Hz.
  2.4A@120 V, 1.2A@240V
  Idle current: 200 mA@120V;100 mA@240V
  Max inrush current: 1 A

PF1-500
Power: 500 W RMS @ 4Ω, 500 W Burst
Frequency Response: +0.0, -.5 dB, 20 Hz to 20 kHz
THD Distortion: < 0.02% typical
Hum & Noise : <100 dB (A weighted)
Damping: >100
Input: 10K Ohm balanced differential
Sensitivity: 1.0 V for RPO
CMR: 74 dB
Controls: Gain (screwdriver adjustable)
Connectors: Input: Looping XLR; female in, male out
  (pin 1 chassis, pin 2 +, pin 3 -)
Power: Power: EC Power connector
  Universal 90–260 VAC, 50/60Hz.
  5A@120 V, 2.5A@240V
  Idle current: 400 mA@120V;200 mA@240V
  Max inrush current: 1 A

PF1-200R  
The PF1-200R is identical to the PF1-200 except for the addition of the RHAON Network Interface. Additional capabilities include:

Inputs: Cobranet; dual RJ45 connectors;accept
  Cat e5 copper cable.
  AES/EBU; Phoenix connectors.
  Analog; Phoenix connectors.
   
Digital Format: 16 or 24 bit PCM; 48 or 96 kHz sample rate;
  selectable Network Latency.
   
Protection: Soft & Peak Limiting, Excursion Control &
  Thermal Regulation.

For additional details on the RHAON Autio Operations Network, refer
to Renkus-Heinz RHAON Brochure (RH 606).

PF1-500R  
The PF1-500R is identical to the PF1-500 except for the addition of the RHAON Network Interface. Additional capabilities include:

Inputs: Cobranet; dual RJ45 connectors;accept
  Cat e5 copper cable.
  AES/EBU; Phoenix connectors.
  Analog; Phoenix connectors.
   
Digital Format: 16 or 24 bit PCM; 48 or 96 kHz sample rate;
  selectable Network Latency.
   
Protection: Soft & Peak Limiting, Excursion Control &
  Thermal Regulation.

For additional details on the RHAON Autio Operations Network, refer to Renkus-Heinz RHAON Brochure (RH 606).

PF2-500R  
The PF2-500R is a RHAON empowered 500/200 Watt biamplifier. It is identical to the PF1-500R except for also having a 200 Watt HF amplifier and associated electronic crossover.

Inputs: Cobranet; dual RJ45 connectors;accept
  Cat e5 copper cable.
  AES/EBU; Phoenix connectors.
  Analog; Phoenix connectors.
   
Digital Format: 16 or 24 bit PCM; 48 or 96 kHz sample rate;
  selectable Network Latency.
   
Protection: Soft & Peak Limiting, Excursion Control &
  Thermal Regulation.
Power: 6A@120V, 3A@240V
  Idle current: 500 mA @ 120 V; 250 mA @ 240

For additional details on the RHAON Autio Operations Network, refer to Renkus-Heinz RHAON Brochure (RH 606).


Copyright
end of page go to top