R-Control is the
standards-based network solution that puts you in control
of an entire Renkus-Heinz system. Monitor driver impedance
and Loudspeaker Specific Processing in real time. Schedule
and supervise critical amplifier functions. All with the network
topologies, groups and zones you define.
Easy
to Learn, Simple to Operate
Total
System Supervision
Intuitive Windows® user interface
Multiple screens give you the functions you need to use at any
level of detail you need, from a single amplifier to the entire
network.
Power On/Off with sequencing
for amplifier groups
Event Scheduler
Channel level controls
Solo function
Individual channel polarity inversion
Real-time load monitoring
Power status
Input & Output signal levels
Limit & Clipping indicators
System Specific Controller module status
Easy to Install
You define the network topology.
You define 100 amplifier groups/zones* 64 amplifiers without
routers; 225 amplifiers using readily available Echelon LonWorks*
routers.
Unique ID number for each Renkus-Heinz amplifier; no DIP switches.
Free topology networks up to 500m (1640 ft),
doubly terminated bus length of 2700m (» 1.7
miles) without routers.
Safety
& Reliability
Audio signals
are unaffected by any network failure, including PC crashes.
Network is unaffected by loss of a node.
Amplifier levels can be adjusted manually if network is down:
R-Control is automatically updated when network is restored.
The Power
of Standards
Based on proven technologies
with global support and multiple hardware sources, including
Echelon LonWorks® (in use worldwide for building control)
and Microsoft Windows 95/98/NT®.
* expandable
in software as needed
All System Specific Power Amplifiers
are designed to accept the R-Control network interface card.
Read more about R-Control (.pdf)