RHAON II 2.1.0

Renkus-Heinz loudspeakers with integrated Dante connectivity require RHAON II 2.1.0, available for download here.

Dante Resources

Renkus-Heinz Dante enabled loudspeakers are one element of a networked audio system that may be comprised of products from many manufacturers. While Dante simplifies connections and communication, there are some considerations to be aware of for a successful setup. For example, network switch selection and configuration. Audinate publishes and maintains authoritative resources that Renkus-Heinz recommends for the best and most up to date information.

For technical and operational support of your Renkus-Heinz loudspeakers, please contact Renkus-Heinz. For support on other equipment within a Dante network, please contact that manufacturer.

Do not contact Audinate for hardware support.

Audinate Software

Dante Controller – Used to establish routing between devices. This is an essential download.

Dante Virtual Soundcard – Makes a computer an audio source and/or destination on the Dante network.

Dante Via – Allows non Dante audio hardware connected to a computer to become I/O on a Dante network.

Audinate Training and Tutorials

Training and Tutorials

Audinate FAQs

FAQs Filtered by Topic

Common FAQs

Dante Software

Networks and Switches

Audinate Firmware Updates

Prior to updating Dante firmware on any single device, Renkus-Heinz recommends the following:

  • Ensure there is a valid need for the firmware update
  • Ensure a compatible firmware update is available from the manufacturers of all products on the network
  • If in doubt, contact Support for all products on the network