ICL-F-DUAL-RN

shape
shape

ICL-F-DUAL-RN

IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. Individual driver control maximizes the acoustical advantages of this design. The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible.

IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitride coated high frequency drivers produce surprisingly high sound levels for their size. They are equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a gym during a close basketball game or shaking the walls with rock music in a club.

ICL-F-DUAL-RN

IC Live for Fixed Installations

IC Live arrays use advanced digital beam steering technology to deliver impeccable sound while staying in the background visually.

Adaptable, Articulate, Invisible
Digital beam steering puts IC Live output where it belongs: on the audience, and way from walls and ceilings.

Computer software lets you define the opening angles for as many as four sonic beams from each ICL-F-RN array module (up to 8 beams from an ICL-F-RN Dual) and aim them up or down. Meanwhile, the slim enclosure stays vertical and inconspicuous.

Two ICL-F-RN modules and an ICL-LM-F-RN module can be stacked for even tighter control and higher output.

Powerful, Accurate, Musical, Scalable
Iconyx transparent technology controls sound with the most advanced, intelligent DSP. Multi-channel Class D digital amplifiers with integral DSP engines control every single array element with programmable precision.

High-current audiophile output stages power each individual lightweight, efficient transducer in the Iconyx array. Even at 100 feet, SPL is an impressive 107 dB (110 dB when stacked). Output is flat from 75 Hz to 18 kHz.

Low frequency energy can be extended to 40 Hz or below with matching subwoofers.

Two IC Live arrays can be combined for added output and control. When full range musical output is important to the program, one or two IC215-S dual 15-inch subwoofers can be added to either array.

One-Touch Presets, Intuitive Software
RHAON empowered IC Live arrays provide a full set of remote control and supervision functions, along< with the ability to store up to ten preset configurations in memory.

The presets adapt the arrays’ 150° wide horizontal coverage for typical applications such as hotel meeting rooms or auditoriums.

For more complex situations, Iconyx BeamWare software makes it easy to shape the array’s coverage to the audience area.

Technical Information

Sensitivity: 1.4 V (for rated power output)
Freq. Range: 90 Hz to 12 kHz (-3 dB)

75 Hz to 18 kHz (-10 dB)

Max SPL: 140 dB peak, 103 dB @ 110 Ft. (30.5 m)
Power Consumption: Idle: 0.7 A (120 V) / 0.35 A (240 V)

1/8 Power: 3.2 A (120 V) / 1.6 A (240 V) (onset of limiting)

1/3 Power: 8.53 A (120 V) / 4.27 A (240 V) (hard limiting)

Horiz. Dispersion: 150° up to 3 kHz; 120° above 3 kHz
Vert. Opening Angles: 5°, 10°, 15° and 20°
Aiming Angle: Adjustable from -30° to +30°
Typical Throw: 160 Ft. (50 meters)
Beam Control: Effective down to 400 Hz
No. Transducers – Each Module: Five 6.5-inch cone transducers with neodymium magnets Three 1-inch HF titanium nitride compression drivers (per module)
No. Amp. Channels: 8 (per module)
Inputs: Analog Audio: 2 balanced inputs on Phoenix ConnectorsAES/EBU: Phoenix ConnectorRJ45 connector for Ethernet Control
Computer Controls: Gain, Mute On/Standby Input SelectionCompression8-Band Parametric EQShelving &Rolloff FiltersDelayPreset Configuration Selection
Power Connector: IEC power connector
Status Indicators: Power, Signal, Overdrive, Thermal, Mute, Input Pad, Preset Configuration Readout
Network Digital Format: 16 or 24 bit PCM; 48 or 96 kHz sample rate; selectable network latency
Hanging Method: Metric M10 attachment points and hinge kits (Hinge Kit included with the product)
Enclosure: Finnish Birch with perforated steel grille
Finish: Standard finish: white paintOptional finishes: black and custom color paint, weather resistant
Weight: 114 Lbs (51.7 Kg) Net
Dimensions: 95” H x 8” W x 7” D(241.5 cm x 20. cm x 17.8 cm)