High Directivity, High Output, Vertical Design
The P3-64 was developed specifically for applications needing wide horizontal directivity and tightly controlled vertical directivity.
It features a 1.4” voice coil high frequency compression driver with a 1” throat coupled to a Complex Conic horn. The patented Complex Conic horn eliminates high frequency beaming and provides wide angle coverage out to 20 kHz and beyond. The four high-efficiency 6” woofers produce a strong low end. Together, the 1” HF driver and quad 6” woofers deliver a surprisingly high 130 dB peak output level from 80 Hz to 20 kHz.
Designed In Flexibility
Twelve M6 Universal Mounting Points and a 2.75 in. x 4.25 in. four-point speaker mounting plate make installation easy and clean. The mounting plate is compatible with the W-WALL-IC7II mount as well as the Adaptive Technologies MM060 Multi-Mount.
A recessed handle at the top of the back panel makes carrying the P3-64 easy, and a standard pole socket makes them the ideal speaker for sound-on-a-stick applications in low-ceilinged rooms where you need the tight, vertical directivity to cover evenly to the back of the room.
Specification
Technical Data |
||
Frequency Response: | P3-64-RN P3-64-RD |
80 Hz. to 20 kHz. (+ or – 3 dB) |
Sensitivity: | P3-64-RN P3-64-RD |
1.0 volt for rated output, analog |
Maximum Peak SPL: | P3-64-RN P3-64-RD |
130 dB-SPL@1 watt/1 meter |
Dispersion: | P3-64-RN P3-64-RD |
150 h x 60 v |
Crossover Frequency: | P3-64-RN P3-64-RD |
1.8 kHz, active electronic |
Enclosure: | P3-64-RN P3-64-RD |
3/4 in./19 mm Lite Ply plywood |
Grille: | P3-64-RN P3-64-RD |
16 GA powder coated, plated steel |
Finish: | P3-64-RN P3-64-RD |
Black (RAL9010) or White (RAL9011) paint, standard. Custom colors optional. |
Mounting: | P3-64-RN P3-64-RD |
12 x M6 UMH points; 1 x M10 nutplate; 2.75 x 4.25 in. speaker mount plate & 35 mm tripod socket |
Weight: | P3-64-RN P3-64-RD |
42 lbs/19 kg |
Dimensions: | P3-64-RN P3-64-RD |
7-7/8” w x 34-3/4” h x 9-3/8” d 200 mm w x 883 mm h x 238 mm d |
SA1250 Amplifier Specifications |
||
Audio Connections: | P3-64-RN | 2 x XLR-3, In & Loop-out, Analog and AES |
P3-64-RD | 2 x XLR-3, In & Loop-out, Analog and AES 2 x RJ45 Dante Primary & Secondary Ethernet |
|
Max Input Level: | P3-64-RN P3-64-RD |
+22 dBu, Analog, 0 dBFS digital |
Network Connections: | P3-64-RN | 2 x RJ45, Looping Ethernet/RHAON |
P3-64-RD | 2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.) | |
User DSP: | P3-64-RN P3-64-RD |
Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms. |
Software: | P3-64-RN P3-64-RD |
RHAON II |
Power Output: | P3-64-RN P3-64-RD |
LF= 1000 watts, @ 8 oms / HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on both channels protects the drivers. |
Mains Voltage: | P3-64-RN P3-64-RD |
100-240 volts, 50/60 Hz auto-switching |
Power Consumption: | P3-64-RN P3-64-RD |
Idle: 200 mW. 1/8 power: 240 W (onset of limiting) 1/3 power: 550 W (hard limiting) |
Power Connector: | P3-64-RN P3-64-RD |
Neutrik powerCON TRUE-1 |
Temperature Limits: | P3-64-RN P3-64-RD |
Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C. |
Latency: | P3-64-RN | 6.25 ms |
P3-64-RD | 6.25 ms Analog & AES 6.25 ms + Dante transport latency |