Varia’s fully modular design enables cabinets to be easily configured as flown vertical arrays, powerful horizontal arrays, or ground stacked systems. With a range of vertical and horizontal dispersion angles and Renkus-Heinz’s unique transitional waveguides, Varia’s highly configurable enclosures and ingenious hardware make it easy to custom design an array for every application.
VARIA101 Array Modules are built around a high power 10″ Low Frequency woofer coupled with either one or two neodymium High Frequency Compression Drivers. These audiophile quality components coupled with Renkus-Heinz unique Tuned Conic Diverter waveguide, ensure the optimum sound quality and arrayability.
7.5º VARIA cabinets employ articulated flying hardware to hang and array like traditional line arrays, 15º and 22.5º cabinets are fixed curvature and must be tight pack arrayed.
VA101 cabinets are self-powered with integral PF2-500R DSP and Cobranet enabled amp modules. VAX101 enclosures require external amplification and DSP processing.
The VA101-7 is designed using a single 10-inch Low Frequency Woofer and two 1-inch High Frequency Compression Drivers. Available in 60º, 90º, and 120º standard configurations, as well as with 60º/90º and 90/120º transitional wave-guide options. The VA101-7 is arrayable from 0º to 7.5º in 1.5º steps.
The VAX101-7 is a passive version of the same system.
Specification
Technical Information
Sensitivity:
VA101-7-52R
1.0 V for RPO
VAX101-7
96 dB (1W/1m)
Freq. Response:
All Models
60 Hz to 20 kHz
Max SPL:
All Models
126 dB peak @ 1 meter
Vert. Coverage:
All Models
7.5°
15° and 22.5° also available
Horiz. Coverage:
All Models
90° standard, 60° & 120° available,
Transitional 60° to 90° & 90° to 120 also available
Power Rating:
VAX101-7
250 W RMS @ 8 Ohms, 500 W Pgm
Transducers:
All Models
Dual 1” HF drivers: RH model SSD1750-TN-8, each 75 W RMS, 150 W Pgm
VA101-7-52R
10” woofer; RH model SSL10-7-4, 4 Ohms, 250 W RMS, 500 W Pgm
VAX101-7
10” woofer; RH model SSL10-7, 8 Ohms, 250 W RMS, 500 W Pgm
Connectors:
All Models
Looping Neutrik Speakon & screw terminals 70/100 Volt line matching transformer
Finish:
All Models
White or Black paint
Custom colors available
Dimensions:
All Models
23 3/4” W x 13” H x 15” D
(60.3 cm x 33 cm x 38.1 cm)
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.