• 19x 4″ Coaxial Transducers each with three HF tweeters
• 5x 4″ LF/MF Transducers progressively spaced
• 24x Amplifier and DSP channels
• Beam control effective down to 200Hz
• Multiple beams and multiple acoustic beam centers
• Multiple Configuration Presets
• RHAON Network
• Slim, Low-Profile Design
ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to 12 steerable beams can be individually shaped and aimed from a single IC32-24-RN column using the powerful software-controlled DSP.
Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter “array within an array” design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.
1.4 V (for rated power output)
80 Hz to 20 kHz (-10 dB)
137 dB peak, (107 dB @ 100 Ft. (30.5 meters))
Idle: 1.5 A (120 V) / 0.75 A (240 V)
1/8 Power: 2.9 A (120 V) / 1.5 A (240 V) (onset of limiting)
1/3 Power: 7.8 A (120 V) / 4.0 A (240 V) (hard limiting)
150° up to 3 kHz; 120° above 3 kHz
Vert. Opening Angles:
5° and 10°
Vert. Aiming Angle:
Adjustable from -30° to +30°
270 Ft. (80 meters)
Effective down to 200 Hz
8ms analog input to outputPreset 0
19 4″ coaxial transducers, each having triple tweeters
5 4″ LF/MF Transducers progressively spaced
No. Amp. Channels:
Coaxial with a 4” woofer and triple 1” tweeters, RH model SSL4-7; 25 W RMS, 50 W Pgm
Analog Audio: 2 balanced inputs on Phoenix ConnectorsAES/EBU: Phoenix ConnectorRJ45 connector for Ethernet Control
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.