ICC48/3

shape
shape

ICC48/3

Ultimate Flexibility in a Smaller Footprint Array

The Iconyx Compact series ICC48/3 brings the ultimate flexibility of the Iconyx to a smaller footprint array. An all-new forty-eight channel digital amplifier powers forth-eight, 3″/77 mm full-range, high sensitivity, treated paper cone drivers. With an amplifier and DSP channel for each driver, all of the flexibility of Iconyx is now available in a package nearly 40% smaller than the classic Iconyx.

DOWNLOADS

PRODUCTS IN THE SERIES

While the package is smaller the performance is not. Full RHAON II beam-steering allows for multiple U.R.G.O beams and high-pass filtering of individual beams. All with the fidelity and musicality expected of a Renkus-Heinz product.

The ICC48/3 brings the performance and directivity of Iconyx to spaces where even the classic Iconyx arrays are too large. The very narrow cabinet will disappear into nearly any venue, while the high vertical directivity of the ICC48/3 can penetrate the most challenging acoustics, taking the exceptional performance of beam-steered line arrays to the most architecturally sensitive spaces.

The included wall-mount bracket makes mounting easy and is nearly invisible behind the array.

The ICC48/3 is available in white and black standard, custom color matching is optional. Standard -RN units have analog and AES inputs, -RD1 units include Dante network audio.

ICC48/3-RN & RD1
Frequency Response:: All Models 135 Hz to 17 kHz (+/– 3dB)
Calculated Max SPL:: All Models 113 dB peak SPL @ 100 Ft. (30.5 meters)
Dispersion:: All Models 120º horizontal below 3 kHz, 90º above 3 kHz x adjustable vertical
Aiming Angle:: All Models Adjustable from –30º to +30º
Beam Control:: All Models Steerable from 200 Hz and up, directivity from 100 Hz and up.
Sensitivity:: All Models 1.4 volt RMS for rated output, analog
Transducers:: All Models 48 x 3 in./77 mm, full-range, high sensitivity, treated paper cone drivers
Inputs:: ICC48/3-RN Analog and Loop-out
AES and Loop-out
ICC48/3-RD1 Analog and Loop-out
AES and Loop-out
Dante digital network audio
Connector:: ICC48/3-RN 2 x Phoenix, In & Loop-out, analog and AES.
2 x RJ45 Primary & Secondary Ethernet/RHAON II
ICC48/3-RD1 2 x Phoenix, In & Loop-out, analog and AES.
2 x RJ45 Primary & Secondary Ethernet/RHAON II/Dante
Enclosure:: All Models Folded aluminum
Grille:: All Models 16 GA powder-coated, plated, perforated steel
Finish:: All Models Black (RAL9011) or White (RAL9010) paint, standard, custom color available.
Mounting:: All Models W-WALL-IC3 wall mount bracket, included
Dimensions:: All Models 4-3/8 in. (111 mm) wide
157 in. (3997 mm) high
4-3/4 in. (121 mm) deep

ICC 48 Channel Amplifier
Power Output:: All Models Forty-eight channels, 40 watts @ 8 ohms, max, each. Multi-band peal and thermal limiting on all channels protects the drivers.
Mains Voltage:: All Models 100-240 volts, 50/60 Hz, auto-switching
Power Consumption:: All Models Idle: 2400 mW
1/8 power (onset of limiting) 240 W
1/3 power (hard limiting) 840 W
Power Connector:: All Models Direct wire with knock-out for 1/2 in. & 3/4 in. trade-size conduit.
Latency:: ICC48/3-RN 9 ms
ICC48/3-RD1 9 ms + Dante Transport Latency
User DSP:: All Models Eight parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
Temperature Limits:: All Models Max.: 140º F/60º C, with no direct sun exposure.
Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.