Dual 8″ LF + Six 19 mm HF Compact, High-output Steerable Array Module
Ultimate Flexibility in High-output Steerable Arrays The ICLive X series brings a new level of flexibility for integrators, contractors, and production/rental houses alike to provide the best solution for any application. The ICLive X series is a complete system, designed from the ground up, consisting of three combinable, steerable-array modules, the ICLX, ICLXL, and the ICLLX; and one matching subwoofer, the ICLX-118S.
New for the ICLive X Series is Renkus-Heinz’s exclusive Acoustic Source Multiplier (ASM) waveguide. The ASM reduces inter-driver spacing to it’s absolute minimum, insuring gradient-lobe free performance to very high frequencies. Additionally, the ASM allows the HF section to be coaxially mounted in front of the LF section, which produces consistent and symmetrical array of both high frequencies and low frequencies along the entire length of the array, improving performance through the critical crossover region.
ICLX The ICLX steerable array module comprises six, 19 mm compression drivers on an ASM Waveguide coaxially mounted in front of two 8″ woofers. The built-in amplifier has eight amplifier channels each with its own dedicated DSP channel.
The ICLX by itself is fully steerable down to 1500 Hz, and its dual woofer arrangement maintains significant pattern control down to lower frequencies. The ICLX is a highly versatile loudspeaker and is intended to be used as a high output digitally steerable line array module in arrays up to 12 modules tall, or in combination with the ICLXL and ICLLX. This provides the system designer with the horsepower, steerability and directivity to deliver consistent coverage and clarity for even the biggest shows in the most difficult spaces.
On it’s own, the ICLX can be used standalone, as main speakers for smaller rooms; portable, speaker-on-a-stick applications; center channel, or any sort of fill applications.
1.4 V (for rated power output), analog
90 Hz to 15 kHz (- 3dB)
75 Hz to 20 kHz (-10 dB)
132 dB Peak, (102 dB at 100 ft (30.5m)) (single cabinet)
141 dB Peak, (111 dB at 100 ft (30.5m)) (four or more cabinets)
120° horizontal x adjustable vertical
Vert. Opening Angles:
10° to 45° UniBeam (computer adjustable, array height dependent)
Adjustable from -30° to +30°
Steerable from 1.5 kHz and up
Directivity from 750 Hz and up
When used singly
Woofer: SSL8-22; High Frequency Driver: SSD-DE7-8; Replacement HF Diaphragm CD-DE7-8
Freely Arrayable when only using ICLX, must be arrayed above ICLXL or below ICLLX.
2 x XLR-3 (Mobile only), 2x 6pin Phoenix block (Fixed only) In & Loop-out, Analog and AES
2 x RJ45, primary & secondary
Neutik powerCON TRUE-1
12 x M6 UMH points; 1 x 1-3/8″/35 mm pole socket. RHANG-ICLX flybar. HK-ICLX or HK-ICLX1 wall mount bracket.
13 ply birch plywood
Black (RAL9010 or White (RAL9011) paint
43 Lbs (19.5 Kg) Net
9-1/2″ w x 19-1/4″ h x 13-1/4″ d (241 mm w x 489 mm h x 337 mm d)
Eight channels, Multi-band peak and thermal limiting on all channels protects the drivers
100-240 Volts, 50/60 Hz auto-switching
Idle: 0.35 A (120 V) / 0.18 A (240 V)
1/8 Power: 1.5 A (120 V) / 0.75 A (240 V) (onset of limiting)
1/3 Power: 4.0 A (120 V) / 2.0 A (240 V) (hard limiting)
Neutrik powerCON TRUE-1
2 x XLR-3, In & Loop-out, Analog and AES, 1 x RJ45 Ethernet
2 x Phoenix In, Analog and AES
1 x RJ45 Ethernet
Eight fully parametric filter, high and low shelf, high and low pass filters, delay to 340 ms
Max. Input Level:
+22 dBu, Analog: 0 dBFS digital
2 x RJ45, Looping Ethernet/RHAON
Note: All analog inputs and outputs comply with AES Standard 48-2005 on interconnecting, grounding and shielding
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.