The P3-12 offers the sonic and performance advantages of a three-way loudspeaker in a cabinet the size of most two-ways. The CoEntrant CDT3 mid-high driver allows the use of a single, optimally sized Complex Conic horn. Not only does this insure consistent directivity through crossover, but also allows the horn to be ideally sized for consistent directivity through the low-mid crossover as well. Only Renkus-Heinz can combine this level of performance, fidelity and power in such a compact, easy to install or transport, loudspeaker.
Specification
Technical Data |
||
Frequency Response: | P3-12-RN P3-12-RD |
60 Hz. to 20 kHz. (+ or – 3 dB) |
Sensitivity: | P3-12-RN P3-12-RD |
1.0 volt for rated output, analog |
Maximum Peak SPL: | P3-12-RN P3-12-RD |
133 dB-SPL@1 watt/1 meter |
Dispersion: | P3-12-RN P3-12-RD |
90 h x 40 v (Optional 60 h x 40 v) |
Crossover Frequency: | All Models | 480 Hz & 2.5 kHz active electronic |
Enclosure: | P3-12-RN P3-12-RD |
3/4 in./19 mm Lite Ply plywood |
Grille: | P3-12-RN P3-12-RD |
16 GA powder coated, plated steel |
Finish: | P3-12-RN P3-12-RD |
Black (RAL9010) or White (RAL9011) paint, standard. Custom colors optional. |
Weight: | P3-12-RN P3-12-RD |
59 lbs/27 kg |
Dimensions: | P3-12-RN P3-12-RD |
14-1/4″ w x 27-1/2″ h x 15-1/2″ d 3620 mm w x 699 mm h x 394 mm d |
SA1250 Amplifier Specifications |
||
Audio Connections: | All Models | 2 x XLR-3, In & Loop-out, Analog and AES |
All Models | 2 x XLR-3, In & Loop-out, Analog and AES 2 x RJ45 Dante Primary & Secondary Ethernet |
|
Network Connections: | All Models | 2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.) |
All Models | 2 x RJ45, Looping Ethernet/RHAON | |
Max Input Level: | All Models | +22 dBu, Analog, 0 dBFS digital |
User DSP: | All Models | Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms. |
Software: | All Models | RHAON II |
Power Output: | All Models | LF= 1000 watts, @ 8 ohms / HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on both channels protects the drivers. |
Mains Voltage: | All Models | 100-240 volts, 50/60 Hz auto-switching |
Power Consumption: | All Models | Idle: 200 mW. 1/8 power: 240 W (onset of limiting) 1/3 power: 550 W (hard limiting) |
Power Connector: | All Models | Neutrik powerCON TRUE-1 |
Temperature Limits: | All Models | Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C. |
Latency: | All Models | 6.25 ms |
All Models | 6.25 ms Analog & AES 6.25 ms + Dante transport latency |